skip to main text

Cleaning the Printer Exterior

Clean the printer regularly to maintain better printing quality and help prevent problems.

To ensure a comfortable working environment, clean the printer exterior about once a month.

Important

  • When the sensor of the feed slot is dirty, the printer might not perform auto feeding properly. Even if the sensor seems clean, we recommend cleaning it because it may have paper dust on it.
  1. Turn printer off.

  2. Unplug power cord from outlet.

    Caution

    • Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the printer on poses a risk of injury if you touch moving parts inside the printer.
  3. Wring out a soft cloth dampened with water or watered-down neutral detergent, and use it to wipe off any dirt.

    Clean the printer exterior and the power cord plug.

    Open the top cover and output guide and clean parts that come in contact with paper (A, B), sensor (C) and window on the back side of the top cover.

    Warning

    • Never use flammable solvents such as alcohol, benzine, or thinner. If these substances come into contact with electrical components inside the printer, there is a risk of fire or electrical shock.

    Important

    • If the output guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend cleaning the output guide even if it does not appear dirty, because it may actually be covered with paper dust.

    • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface.
    • When neutral detergent is used, be sure to wipe off the detergent with soft cloth with water.
  4. When dirt is wiped off, wipe off water with dry soft cloth.

  5. Plug power cord into outlet.