skip to main text

Reducing Dust from Cutting Rolls

If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting Cut-dust reduction to ON from the operation panel menu, which will coat the leading and trailing edges of the printed document with ink. As a result, you can reduce problems with the print head. You can set Cut-dust reduction according to the media type.

A: The ink is coated.

B: Cut Position

Important

  • Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight paper. If not cut properly, the paper may jam.

  • Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless printing, set Cut-dust reduction to OFF.

Follow these steps to set Cut-dust reduction to ON.

  1. Select paper settings display area on Home screen.

  2. Select paper source.

  3. Select Paper settings.

  4. Select Advanced.

  5. Select Cut-dust reduction.

  6. Select ON.