skip to main text

Front View

(1) operation panel

Used to adjust settings or operate the machine.

(2) ADF (Auto Document Feeder)

Load documents here. Documents loaded in the document tray are scanned automatically, one page at a time.

(3) document feeder cover
Open to clear jammed documents.
(4) document guides
Adjust to match the width of documents in the ADF.
(5) document tray
Open to load documents in the ADF. You can load multiple pages of the same size and thickness. Load documents face-up.
(6) document output slot
Ejects documents scanned in the ADF.
(7) document cover
Open to load originals on the platen glass.
(8) front cover
Open to replace ink tanks or clear internal paper jams.
(9) paper output tray
Pull out to support printed documents. The tray covers the cassette when extended. Normally, leave the tray out.
(10) output tray extension
Pull out to support ejected paper.
(11) paper output support
Open to support ejected paper.
(12) USB flash drive port
Insert USB flash drives here.

 Warning

  • Do not connect any equipment other than USB flash drives to the machine's USB flash drive port. This may cause fire, electric shock, or damage to the machine.

Important

  • Do not touch any exposed metal parts.
  • Do not connect USB cables longer than 10 feet (3 meters), which may affect operation of other peripherals.
(13) cassette

Load paper here. Load a stack of the same size and type of paper, which will be fed automatically one sheet at a time.

(14) platen glass
Load originals here.