skip to main text

Printing Network Settings

Use the operation panel to print the machine's current network settings.

Important

  • The network settings printout contains important information about your network. Handle it with care.

  1. Make sure machine is turned on.

  2. Load two sheets of A4 or Letter-sized plain paper.

  3. Press and hold Wi-Fi button and release it when ON lamp flashes.

  4. Press Wi-Fi button again.

    The machine starts printing network settings information.

    The printed network settings information is as follows:

    Item

    Description

    Setting

    Product Information

    Product information

    Product Name

    Product name

    XXXXXXXX

    ROM Version

    ROM version

    XXXXXXXX

    Serial Number

    Serial number

    XXXXXXXX

    Wireless LAN

    Wireless LAN

    Enable/Disable

    MAC Address

    MAC address

    XX:XX:XX:XX:XX:XX

    WPS PIN CODE

    WPS PIN code

    XXXXXXXX

    Infrastructure

    Infrastructure

    Enable/Disable

    Connection

    Connection status

    Active/Inactive

    SSID

    SSID

    Wireless LAN SSID

    Channel *1

    Channel

    XX (1 to 11)

    Encryption

    Encryption method

    None/WEP/TKIP/AES

    WEP Key Length

    WEP key length (bits)

    Inactive/128/64

    Authentication

    Authentication method

    None/auto/open/shared/WPA-PSK/WPA2-PSK

    Signal Strength

    Signal strength

    0 to 100 [%]

    TCP/IPv4

    TCP/IPv4

    Enable

    IP Address

    IP address

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet mask

    XXX.XXX.XXX.XXX

    Default Gateway

    Default gateway

    XXX.XXX.XXX.XXX

    TCP/IPv6

    TCP/IPv6

    Enable/Disable

    IP Address *2

    IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Subnet Prefix Length *2

    Subnet prefix length

    XXX

    Default Gateway *2

    Default gateway

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IPsec *3

    IPsec setting

    Active

    Security Protocol *3

    Security method

    ESP/ESP & AH/AH

    Access Point Mode

    Access point mode

    Enable/Disable

    Connection

    Connection status

    Active/Inactive

    SSID

    SSID

    Access Point Mode SSID

    Password

    Password

    Password of the access point mode (8 to 10 alphanumeric characters)

    Channel

    Channel

    3

    Encryption

    Encryption method

    AES

    Authentication

    Authentication method

    WPA2-PSK

    TCP/IPv4

    TCP/IPv4

    Enable

    IP Address

    IP address

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet mask

    XXX.XXX.XXX.XXX

    Default Gateway

    Default gateway

    XXX.XXX.XXX.XXX

    TCP/IPv6

    TCP/IPv6

    Enable/Disable

    IP Address *2

    IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Subnet Prefix Length *2

    Subnet prefix length

    XXX

    Default Gateway *2

    Default gateway

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IPsec *3

    IPsec setting

    Active

    Security Protocol *3

    Security method

    Other Settings

    Other settings

    Printer Name

    Printer name

    Printer name (Up to 15 alphanumeric characters)

    WSD Printing

    WSD printing setting

    Enable/Disable

    WSD Timeout

    Timeout

    1/5/10/15/20 [min]

    LPD Printing

    LPD printing setting

    Enable/Disable

    Bonjour

    Bonjour setting

    Enable/Disable

    Bonjour Service Name

    Bonjour service name

    Bonjour service name (Up to 52 alphanumeric characters)

    PictBridge Commun.

    PictBridge communication

    Enable/Disable

    DNS Server

    Obtain DNS server address automatically

    Auto/Manual

    Primary Server

    Primary server address

    XXX.XXX.XXX.XXX

    Secondary Server

    Secondary server address

    XXX.XXX.XXX.XXX

    Proxy Server

    Proxy server setting

    Enable/Disable

    Proxy Address

    Proxy address

    XXXXXXXXXXXXXXXXXXXX

    Proxy Port

    Proxy port specification

    1 to 65535

    ("XX" represents alphanumeric characters.)

    *1 Channel may range from 1 to 11 depending on country or region of purchase.

    *2 Network status is only printed when IPv6 is enabled.

    *3 Network status is only printed when IPv6 and IPsec settings are enabled.