Maintenance

This item is displayed on the HOME screen.

• Nozzle Check

  Prints out the nozzle check pattern.

  • Checking for Nozzle Clogging

• Print Head Cleaning

  Select this to clean the print head.

  • Cleaning the Print Head

• Print Head Alignment

  Adjusts the alignment of print head.

  • Automatic Adjustment to Straighten Lines and Align Colors
  • Manual Adjustment to Straighten Lines and Align Colors

• Paper feed adjustment

  Sets the paper feed amount.

  • Set priority

    Sets the method of adjusting the paper feed amount.

    • Auto

      Prioritize print quality will be selected when Print Target is set from the printer driver.

    • Prioritize print quality

      Adjusts the print quality to make the horizontal streaks of the print less noticeable. The setting for Adjust print quality is applied. When Paper feed fine adjustment is executed, the setting for Paper feed fine adjustment is applied in addition to the setting for Adjust print quality.

    • Prioritize length accuracy

      Adjusts the length of the ruled lines on the printed piece to match. The values for Change adjustment values under Adjust feed length are applied.

  • Adjust print quality

    Select this when the printed material has different colored horizontal streaks.

    • Automatically Adjusting Different Colored Horizontal Streaks
    • Manually Adjusting Different Colored Horizontal Streaks

  • Adjust feed length

    Select this to print the exact length of the ruled lines in a CAD drawing.

    • Adjusting Line Length

• Color calibration

  Select this to perform the color calibration or check the adjustment information.

  • Performing Color Calibration

• Maintenance cartridge info

  Displays the estimated usage of maintenance cartridge. Select Replace to replace the maintenance cartridge.

  • Replacing the Maintenance Cartridge

• Head Replacement

  Select this to replace the print head.

  • Replacing the Print Head

• Replace cutter blade unit

  Select this to replace the cutter blade.

  • Replacing the Cutter Blade

• Platen cleaning

  Select this to clean inside the top cover.

  • Cleaning Inside the Top Cover

• Prepare to move

  Select this to prepare for transporting the printer.

  • Preparing to Transfer the Printer