Auto maintenance settings

This item is displayed when you select Printer settings on the Home screen.

Important

• The administrator password is required to change settings if it is enabled for changing settings using the operation panel.

• Auto nozzle check

  Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic nozzle checking.

• Nozzle check error display

  Enables/Disables displaying the nozzle check error.

• System Cleaning frequency

  Specifies the frequency of automatic system cleaning.

  Note

  • To maintain print quality, we recommend you select Short if you use the printer at a higher elevation.

• Print pattern after new head

  Selects whether you print an adjustment pattern after replacing the Print head.

• Ink ejection status check

  Sets the function to automatically detect the print head ejection status.

  • Auto fix

    Performs an automatic fix when a change in the print head ejection status is detected.

  • Display warning

    Displays a notification message on the touch screen when a change in the print head ejection status is detected.

  • OFF

    Disables automatic detection.

  Important

  • Depending on the paper feeding method, Cutting mode settings, etc., automatic detection may not be performed.