skip to main text

Specifying the Ink Drying Time

When you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface during ejection, soiling it. In that case, you may be able to improve the condition by setting the time to wait for the ink to dry after printing.

Important

  • Printer settings are applied when the ink drying time is not set in the printer driver. If the ink drying time is set in the printer driver, that setting has priority.

Note

  • If the cutter touches the print surface on which the ink is not dry, the paper surface may become scratched or soiled, or the paper surface may rub when the paper falls and the surface may become soiled.

    To wait for the ink to dry without allowing printed materials to fall after printing, set Cutting mode on the printer menu to Eject cut.

Pausing Between Scans

Specify the waiting time between printing one scan and printing the next one. You can set the drying waiting time and the target area where the waiting time occurs.

  1. Select paper settings display area on Home screen.

  2. Select Paper settings.

  3. Select Advanced.

  4. Select Pause between scans.

  5. Select Ink drying wait time.

  6. Select a setting from the menu.

Pausing Between Pages

Specify the waiting time between printing one page and ejecting the paper. If there is a next page, it will be printed after the ink drying time has elapsed.

  1. Select paper settings display area on Home screen.

  2. Select Paper settings.

  3. Select Advanced.

  4. Select Pause between pages.

  5. Select a setting from the menu.