skip to main text

Checking for Nozzle Clogging

If printing is faint or affected by banding in different colors, make sure the print head nozzles are clear by printing a test pattern to check the nozzles.

Important

  • When using cut sheets, do not move the release lever until instructions (guidance) for removing the paper are displayed.

    Moving the release lever during printing or maintenance operations will cause the printer to stop.

Note

Paper to Prepare

When using rolls
An unused roll at least 10.00 in. (254.0 mm) wide
When using sheets
1 sheet of unused paper of at least A4/Letter size
  1. Load paper.

  2. Select (Setup) on HOME screen.

  3. Select Maintenance.

  4. Select Nozzle Check.

    A confirmation message appears.

  5. Select Yes.

    The printer now prints a test pattern for checking the nozzles.

  6. Check the printing results.

    If the horizontal lines are not faint or incomplete, the nozzles are clear.

    If some sections of the horizontal lines are faint or incomplete, the nozzles for those colors are clogged.

    If horizontal lines are faint or incomplete, execute print head cleaning.