skip to main text

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Flick the HOME screen, then tap Setup.

    The setup menu screen will appear.

  3. Tap Maintenance.

    The Maintenance screen will appear.

  4. Tap Roller cleaning.

    Figure: Touch screen

    The confirmation screen will appear.

  5. Tap Yes.

  6. Tap the paper source to clean (Cassette 1 or Cassette 2).

  7. Follow the message to remove any paper from the paper source you selected in step 6.

  8. Tap OK.

    The paper feed roller will rotate as it is cleaned.

  9. Make sure that the paper feed roller has stopped rotating, then follow the message to load three sheets of A4 or Letter-sized plain paper in the paper source you selected in step 6.

  10. Extend the output tray extension, then open the paper output support.

  11. Tap OK.

    The machine starts cleaning. The cleaning will be complete when the paper is ejected.

  12. When the completion message appears, tap OK.

If the problem is not resolved after cleaning the paper feed roller, contact the service center.