Cassette settings

By registering the paper size and the media type loaded in the cassette, you can prevent the machine from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings. In addition, you can allow the machine to switch the paper source automatically when a cassette runs out of paper.

For details:

Paper Setting for Printing

• Register cassette paper info

  Registers the paper size and the media type you load in the cassette.

  Note

  • When you register the paper size and the media type, the screen to select whether you apply the settings to those for copying is displayed. Select Yes to apply the registered settings to copying.

  • For details on the proper combination of paper settings you can specify by the printer driver or on the touch screen:

    Setting the Media Type with the Printer Driver and on the Printer

    Setting the Paper Size with the Printer Driver and on the Printer

• Detect paper setting mismatch

  If you select Yes, the machine detects whether the paper size and the media type are identical with those registered in Register cassette paper info. If printing starts with the settings that do not match, an error message is displayed on the touch screen.

  Note

  • When No is selected, Register cassette paper info or Detect cassette reinsertion is disabled.

• Detect cassette reinsertion

  If you select Yes, the machine detects the cassette is reinserted. When the Register cassette paper info screen is displayed, register the paper size and the media type.

• Auto feed switch

  If you select Yes, the machine switches the paper source automatically when a cassette runs out of paper. Load A4, Letter, or Legal sized plain paper in both of the cassettes to activate this function.