FA029M

Changing the Paper Settings

This machine prints received faxes to paper loaded in the machine beforehand. You can use the operation panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper.

Important
  • If the size of loaded paper is different from that specified in the paper size setting, the received faxes are stored in the machine's memory and FAX output error Check the page size and select . is displayed on the LCD. In this case, load the same size of paper as that specified in the paper size setting, then press the OK button.

    You can also press the Stop button to close the message and print the stored documents in the machine's memory later.

    Printing a Document in Machine's Memory

  • If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored in the machine's memory and FAX output error No paper. Check the following and press when finished. is displayed on the LCD. In this case, load paper and press the OK button.

    You can also press the Stop button to close the message and print the stored documents in the machine's memory later.

    Printing a Document in Machine's Memory

Note
  • If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, the sender's machine may send the fax automatically reduced in size or divided, or send only a part of the original.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the FAX button.

    The Fax standby screen is displayed.

  3. Press the left Function button.

    The Fax menu screen is displayed.

  4. Select FAX paper settings, then press the OK button.

    The FAX paper settings screen is displayed.

  5. Specify the settings.

    Use the UPDOWN button to change the setting item and use the LEFTRIGHT button to change the setting.

    figure: LCD
    Note
    • If the setting cannot be specified is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.

    1. Page size

      Select the page size from A4, Letter, or Legal.

    2. Type

      Select Plain paper.

    3. 2-sidedPrintSetting

      Select two-sided printing or single-sided printing.

      Two sided printing is available for black & white faxes. Color faxes are printed on the single-side of paper regardless of this setting.

      After 2-sided is selected for 2-sidedPrintSetting, press the right Function button to specify the stapling side.

      Note
      • When Page size is set to A4 or Letter, the received faxes are printed on the two-sides of paper.

  6. Press the OK button.

    The LCD returns to the Fax menu screen.

Page top