skip to main text

Turning the Printer On and Off

Turning on the printer

  1. Open the rear tray cover.

    The paper output slot cover opens automatically.

  2. Press the ON button to turn on the printer.

    The POWER lamp flashes and then remains lit.

    Note

    • It may take a while for the printer to start printing immediately after you turn on the printer.
    • If the Alarm lamp flashes, see If an Error Occurs.
    • If you use the battery, make sure that it is charged. For details on how to check it, refer to the battery's instruction manual.

Turning off the printer

  1. Press the ON button to turn off the printer.

    When the POWER lamp stops flashing, the printer is turned off.

    Important

    • When you unplug the power cord after turning off the printer, be sure to confirm that the POWER lamp is off.
    • If you stand the printer up or carry the printer before the POWER lamp goes off, this may cause the ink to leak or the printer to break.

    Note

    • It may take up to 40 seconds until the power is turned off.

    • You can set the printer to automatically turn off when no print jobs are sent to the printer for a certain interval. This is the default setting.