UG054W

Changing the Machine Settings on the LCD

This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amt. as an example.

Note
  • The * (asterisk) on the LCD indicates the current setting.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the Setup button.

    The Setup menu screen is displayed.

  3. Use the LEFTRIGHT button to select Device settings, then press the OK button.

    When you change the fax settings, press the Setup button, then select Fax settings.

  4. Use the LEFTRIGHT button to select Print settings, then press the OK button.

    figure: LCD
  5. Use the LEFTRIGHT button to select Extended copy amt., then press the OK button.

    figure: LCD
  6. Use the LEFTRIGHT button to select a setting item, then press the OK button.

    figure: LCD

For details on each setting item:

Fax settings

Print settings

LAN settings

Dev. user settings

Mob. phone settings

Bluetooth settings

Firmware update

Reset setting

Page top