UG054W

Changing the Machine Settings on the LCD

This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the MENU button.

    The menu screen is displayed.

  3. Select Setup, then press the OK button.

  4. Select Device settings, then press the OK button.

    The Device settings screen is displayed.

  5. Use the UPDOWN button to select the setting item, then press the OK button.

    figure: LCD

    The setting screen for the selected item is displayed.

  6. Use the UPDOWN button to select the menu, then press the OK button.

    figure: LCD
  7. Use the UPDOWN button to select the setting item, then press the OK button.

    figure: LCD

For details on each setting item:

FAX settings

Print settings

LAN settings

Device user settings

Mobile phone print settings

Bluetooth settings

PictBridge print settings

Language selection

Firmware update

Reset setting

Note
  • You can use the machine considering the environment, such as setting 2-sided printing as default.

    About ECO settings

  • You can reduce the operating noise when printing at night.

    About Quiet setting

Page top