skip to main text

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Watch the movie

Note

  • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. If the remaining ink level is low, refill ink tanks.

You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper on the rear tray.

    After loading paper on the rear tray, the paper information registration screen appears on the LCD. Select A4 or Letter for Size: and Plain paper for Type: and then press the OK button.

  3. Pull out the paper output tray and open the output tray extension.

  4. Press the Setup button, use the Left Right button to select Maintenance, and press the OK button.

  5. Use the Left Right button to select Nozzle check and then press the OK button.

    The nozzle check pattern will be printed.

    Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

  6. Examine the nozzle check pattern.