skip to main text

Specifications

General Specifications

Printing resolution (dpi) 600 (horizontal) x 1200 (vertical)
Interface

USB Port:

Hi-Speed USB *

Network Port:

Wired LAN: 100BASE-TX / 10BASE-T

Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b

* A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

 

USB and LAN can be used at the same time.

Wi-Fi and wired LAN cannot be used at the same time.

Print width 8 in. (203.2 mm)
Printable area

Standard printing:

  • Top margin: 0.12 in. (3.0 mm)

  • Bottom margin: 0.20 in. (5.0 mm)

  • Left margin:

    • Letter/Legal: 0.26 in. (6.4 mm)

    • Other sizes: 0.14 in. (3.4 mm)

  • Right margin:

    • Letter/Legal: 0.25 in. (6.3 mm)

    • Other sizes: 0.14 in. (3.4 mm)

* For printable area of envelope, see below.

Auto duplex printing:

  • Top margin: 0.20 in. (5.0 mm)

  • Bottom margin: 0.20 in. (5.0 mm)

  • Left margin:

    • Letter: 0.26 in. (6.4 mm)

    • Other sizes: 0.14 in. (3.4 mm)

  • Right margin:

    • Letter: 0.25 in. (6.3 mm)

    • Other sizes: 0.14 in. (3.4 mm)

Operating environment

Temperature: 41 to 95 °F (5 to 35 °C)

Humidity: 10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature and humidity conditions.

Recommended conditions:

Temperature: 59 to 86 °F (15 to 30 °C)

Humidity: 10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.

Storage environment

Temperature: 32 to 104 °F (0 to 40 °C)

Humidity: 5 to 95 % RH (no condensation)

Power supply

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Power consumption

Printing: 13 W or less *1

Standby (minimum): 0.8 W or less *1*2

Standby (all ports connected): 1.6 W or less

OFF: 0.3 W or less

*1 USB connection to PC

*2 The wait time for standby cannot be changed.

External dimensions (W x D x H)

Approx. 15.9 x 14.6 x 6.6 in. (Approx. 403 x 369 x 166 mm)

* With the Cassette and trays retracted.

Weight

Approx. 13.2 lb (Approx. 6.0 kg)

* With the Print Head installed.

Print Head/Ink BK 640 nozzles

Network Specifications

Communication protocol TCP/IP
Wired LAN

Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)

Transfer speed: 10 M/100 Mbps (auto switching)

Wi-Fi

Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b

Frequency bandwidth: 2.4 GHz

Channel: 1-11 or 1-13

* Frequency bandwidth and available channels differ depending on country or region.

Communication distance: Indoors 164 feet/50 m

* Effective range varies depending on the installation environment and location.

Security:

WEP (64/128 bits)

WPA-PSK (TKIP/AES)

WPA2-PSK (TKIP/AES)

Setup:

WPS (Push button configuration/PIN code method)

WCN (WCN-NET)

Easy wireless connect

Other Features: Administration password

Minimum System Requirements

Conform to the operating system's requirements when higher than those given here.

Windows

Operating System

Windows 10, Windows 8.1, Windows 7 SP1

Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later.

Printer driver and IJ Network Device Setup Utility support the following OS:

Windows Server 2008 R2 SP1, Windows Server 2012 R2 and Windows Server 2016.

Hard Disk Space

2.0 GB or more

Note: For bundled software installation.

The necessary amount of hard disk space may be changed without notice.

Display XGA 1024 x 768

Other Supported OS

iOS, Android

Some functions may not be available with the supported OS.

Refer to the Canon web site for details.

Mobile Printing Capability

PIXMA Cloud Link
  • Internet connection or CD-ROM drive is required to install the software for Windows.

  • In an in-house network environment, the 5222 port must be open. Contact the network administrator for details.

Information in this manual is subject to change without notice.