skip to main text

Advanced (Paper settings)

Select the paper setting display area and select Paper settings to display this menu.

Advanced
Roll length (change default)
Head height
Auto / High / Medium-high / Standard / Medium-low / Low / Super low
Skew detection accuracy
Standard / Loose / OFF
Cutting mode
Automatic cut / Eject cut / User cut
Cut speed
Fast / Standard / Slow
Trim edge first
Auto / Off / On(Preset Length) / On(Input Length) / Manual
Cut-dust reduction
ON / OFF
Transport unit vacuum strength
Auto / Strong / Medium-strong / Standard / Medium-weak / Weak
Guide arm retention pressure
High / Low
Roll paper tension (printing)
High / Standard / Low
Roll paper tension (feeding)
High / Standard / Low
Roll paper tension (winding up)
High / Standard / Low
Pause between scans
Ink drying wait time
OFF / 0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds
Ink drying target area
Overall / Leading edge
Pause between pages
OFF / 30 seconds / 1 minute / 3 minutes / 5 minutes / 10 minutes / 30 minutes / 60 minutes
Pause on last page take-up
OFF / 5 minutes / 10 minutes / 30 minutes / 60 minutes / 120 minutes / 240 minutes / 480 minutes / 960 minutes
Pause timing priority
Between pages / On last page
Leading edge margin (roll)
3mm / 20mm
Leading edge margin (sheet)
3mm / 20mm
Extension for borderless printing
Paper with recommended width
Large / Standard / Small
Paper of sufficient width
Select extension amount
1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max)
Sample of extension amounts
Detect paper width
Enable / Disable
Paper core outer diameter
Paper thickness
Auto-rewind roll paper at sleep
Enable / Disable
Reset detection priority data
Reset paper settings by paper