skip to main text

Forwarding Scanned Data to Computer Using Operation Panel

Before forwarding scanned data to the computer, check the following:

  • MP Drivers are installed. (Windows)

    If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from the Canon website.

  • The scanner driver is installed. (Mac OS)

    If the scanner driver is not yet installed, install the scanner driver from the Canon website.

  • The machine is connected to a computer correctly.

    Make sure the machine is connected to the computer correctly.

    Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode.

    If you perform scanning via a network connection, make sure all the required settings have been specified.

  • The destination and the file name are specified in Canon IJ Scan Utility.

    You can specify the destination and the file name in Canon IJ Scan Utility. For more on settings of Canon IJ Scan Utility:

  1. Make sure machine is turned on.

  2. Select Scan on HOME screen.

    LCD and Operation Panel

    If you forward the data to the USB-connected computer:

    The Scan standby screen is displayed.

    figure: LCD

    Go to step 3.

    Note

    • If the screen for selecting to which you save the data is displayed, select PC and press the OK button and then select Local (USB) and press the OK button. The Scan standby screen is displayed.

    If you forward the data to the network-connected computer:

    The screen for selecting to which you save the data is displayed.

    figure: LCD

    Note

    • If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on the LCD, press the left Function button to display the screen for selecting to which you save the data.

    Select the computer to forward the scanned data following the procedure below.

    1. Select PC and press OK button.

    2. Use UPDOWN button to select computer to forward scanned data and press OK button.

      figure: LCD

      The Scan standby screen is displayed.

      Note

      • If you select Local (USB) on the Select PC screen, the data is forwarded to the USB-connected computer.

      • When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select Enable for WSD scan from this device on WSD setting on Other settings in LAN settings under Device settings.

        WSD setting

        If you press the left Function button, the machine starts searching for the connected computers again.

  3. Use LEFTRIGHT button to select document type.

    Note

    • When you forward the scanned data to the computer searched using WSD, you cannot select the document type.

    figure: LCD
    Auto scan

    The machine detects the type of the originals automatically and the image is forwarded in the optimized size, resolution and data format.

    Important

    • Load originals properly according to their type; otherwise, some originals may not be scanned properly.

      For more on loading the original:

      Loading Originals

    • The following items can be scanned:

      Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs

    • The following items cannot be scanned properly.

      • A4 sized photos

      • Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its backbone cut off

      • Originals on thin white paper

      • Long and narrow originals such as panoramic photographs

    Document

    Scans the original on the platen glass as a document data applying the settings specified in Scan settings.

    Photo

    Scans the original on the platen glass as a photo data applying the settings specified in Scan settings.

  4. Press right Function button to adjust settings as necessary.

    Setting Items for Scanning Using Operation Panel

  5. Load original on platen glass.

    Note

    • You can check the procedure to load the original by pressing the center Function button.

  6. Press Color button for color scanning, or Black button for black & white scanning.

    Note

    • When you forward the scanned data to the computer using WSD, press the Color button.

    • If you select JPEG or TIFF for Format on the scan setting screen:

      The machine starts scanning and scanned data is forwarded to the computer.

    • When you select PDF or Compact PDF for Format on the scan setting screen:

      The confirmation screen asking you if you continue scanning is displayed after scanning is complete.

      figure: LCD

      If you continue scanning, load the original on the platen glass and start scanning.

      If you do not continue scanning, press the left Function button. The scanned data is forwarded to the computer.

    Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility.

    Remove the original on the platen glass after scanning is complete.

    Important

    • If the scanning result with Auto scan is not satisfactory, select Document or Photo according to the original in step 3 and specify the scan size or other setting items in step 4.

If program selection screen appears (Windows):

  • For Windows 8.1, Windows 8, Windows 7, or Windows Vista:

    The program selection screen may be displayed after pressing the Color or Black button. In this case, select Canon IJ Scan Utility and click OK.

  • For Windows XP:

    The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action, and then click OK. From the next time, Canon IJ Scan Utility is automatically started.

If you want to scan originals with advanced settings, or if you want to edit or print scanned images:

If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the scanned images, such as optimizing or trimming.

In addition, you can edit or print the scanned images using the compatible application software to make better use of them.

Scanning Photos and Documents

Note