skip to main Item

imagePROGRAF PRO-2000

Color Matching Paper Settings List for Canon iPF Series

You can adjust the color of printouts to more closely match the color of the target model.

Paper Category Printer Driver Operation Panel Target Model
Photo Papers LW Photo Paper (Photo Color 1) LW Photo Color 1 Canon iPF6400, iPF6400S
Canon iPF6450
Canon iPF8400, iPF8400S
Canon iPF9400, iPF9400S
HW Photo Paper (Photo Color 1) HW Photo Color 1 Canon iPF6400, iPF6400S
Canon iPF6450
Canon iPF8400, iPF8400S
Canon iPF9400, iPF9400S

Note

  • The paper was not registered to the printer at factory shipment.

    Add the paper to the printer by using Media Configuration Tool.

  • Printer Driver Settings for Windows

    Set each item in the [Main] sheet as shown below.

    • [Media Type]

      Refer to the list above and select the paper that matches the target model.

      Use the operation panel to make the settings on the printer as well.

      Select [Easy Settings] when using registered settings.

      Select [Advanced Settings] for more detailed settings.

    • [Easy Settings]
      • [Print Target]

        Select one of the following:

        • [Default Settings]
        • [Photo (Color)]
        • [Poster]
    • [Advanced Settings]
      • [Color Mode]: [Color]

        Click [Color Settings...] to display the [Color Settings] dialog box.

        Click the [Matching] tab.

        • [Color Correction]: [Driver Matching]
        • [Rendering Intent]

          Select one of the following:

          • [Perceptual (Photo)]
          • [Perceptual]
          • [Saturation (Poster)]
          • [Saturation]

    Note

    • The color of printouts cannot be adjusted to more closely match the color of the target model if settings other than these are used for printing.
    • The color of printouts cannot be made to perfectly match the color of the target model.
  • Printer Driver Settings for macOS

    Set each item in the [Quality & Media] dialog as shown below.

    • [Media Type]

      Refer to the list above and select the paper that matches the target model.

      Use the operation panel to make the settings on the printer as well.

    • [Rendering Intent]

      Select one of the following:

      • [Rendering Intent]: [Perceptual (Photo)]
      • [Rendering Intent]: [Saturation (Poster)]

    Note

    • The color of printouts cannot be adjusted to more closely match the color of the target model if settings other than these are used for printing.
    • The color of printouts cannot be made to perfectly match the color of the target model.