skip to main text

Menu Structure

The * on the right side of an item indicates the default value.

Values may vary depending on your model and firmware version.

  • Ink information

    Current estimated ink levels

    Replace

    Order ink now

  • Paper settings

    Roll paper 1

    Replace paper

    Feed/cut

    Remove paper

    Paper settings

    Width/Length/Type/Advanced

    Roll paper 2

    Replace paper

    Feed/cut

    Remove paper

    Roll unit use setting

    Paper settings

    Width/Length/Type/Advanced

    Take-up mode

    Roll unit use setting

    Auto feed to take-up position

    Skip errors during take-up

    ON/OFF

    Wind up after cutting

    Enable/Disable

    Paper retention setting

    Release/Retain

    Use in take-up mode

    Use/Do not use

    Manual

    Replace paper

    Remove paper

    Paper settings

    Page size/Type/Advanced

  • Maintenance

    Print nozzle check pattern

    Print head cleaning

    Cleaning

    All colors/Pattern 1/Pattern 2/Pattern 3

    Deep cleaning

    All colors/Pattern 1/Pattern 2/Pattern 3

    System cleaning

    All colors/Pattern 1/Pattern 2/Pattern 3

    Print head alignment

    Auto (standard)

    Roll paper 1/Roll paper 2/Manual

    Auto (fine)

    Roll paper 1/Roll paper 2/Manual

    Manual

    Roll paper 1/Roll paper 2/Manual

    Paper feed adjustment

    Set priority

    Roll paper 1

    Auto*/Prioritize print quality/Prioritize length accuracy

    Roll paper 2

    Auto*/Prioritize print quality/Prioritize length accuracy

    Manual

    Auto*/Prioritize print quality/Prioritize length accuracy

    Adjust print quality

    Auto/Manual

    Adjust feed length

    Print alignment pattern

    Roll paper 1/Roll paper 2/Manual

    Change adjustment values

    Color calibration

    Auto adjust

    Roll paper 1/Roll paper 2/Manual

    Enable/disable adjustment values

    Enable/Disable

    Adjustment information

    Roll paper 1/Roll paper 2/Manual

    Calibration guide setting

    Enable/Disable

    Reset adjustment values

    Maintenance cartridge info

    Maintenance cartridge usage

    Replace

    Head replacement

    Replace cutter blade unit

    Platen cleaning

    Prepare to transportation

    Move indoors on the same floor

    Move indoors to a different floor

    Transport outdoors

  • Job management

    Print job

    List of print jobs

    Delete/Priority printing/Release hold

    Saved job

    Job box list

    Job list

    Delete/Start print

    Print the job list

    Job history

    Display job history

    Print job history

    Pause printing

    Enable

    Disable*

  • Print from USB flash drive

    Folder/file list

    Number of copies

    Preview

    Settings

    Start print

  • LAN settings

    Change LAN

    Activate wired LAN

    Activate wireless LAN

    Activate direct connect.

    Disable LAN

    Wireless LAN setup

    Cableless setup

    Standard setup

    WPS (Push button method)

    Other setup

    Advanced setup/WPS (PIN code method)

  • Device settings

    Test print

    Print nozzle check pattern

    Status print

    Status print (administrator)

    Print LAN details

    Print setting print

    Print advanced paper settings

    Print job history

    Print menu map

    Print settings

    Print head movable width setting

    Data width*/Maximum movable width/Paper width

    Prioritize paper size

    Enable/Disable*

    PDF print settings

    Print quality settings

    Color mode

    Monochrome/Color*

    Matching method

    Perceptual (Photo)*/Saturation (Poster)

    Print quality

    Standard/High*/Highest

    Input resolution

    600 dpi*/300 dpi

    Paper settings

    Paper src

    Auto select*/Roll paper (auto)/Roll paper 1/Roll paper 2/Manual

    Margin

    3mm*/5mm

    Rotate

    0 degrees*/90 degrees

    Fit paper

    ON*/OFF

    Display during process

    Warning display

    Enable/Disable*

    JPEG print settings

    Print quality settings

    Color mode

    Monochrome/Color*

    Matching method

    Perceptual (Photo)*/Saturation (Poster)

    Print quality

    Standard/High*/Highest

    Input resolution

    600 dpi*/300 dpi

    Paper settings

    Paper src

    Auto select*/Roll paper (auto)/Roll paper 1/Roll paper 2/Manual

    Margin

    3mm*/5mm

    Rotate

    0 degrees*/90 degrees

    Fit paper

    ON*/OFF

    Print from USB flash settings

    Color mode

    Monochrome/Color*

    Print qlty

    Standard/High*/Highest

    Paper src

    Auto select*/Roll paper (auto)/Roll paper 1/Roll paper 2/Manual

    Rotate

    0 degrees*/90 degrees

    Fit paper

    ON*/OFF

    Print setting print

    LAN settings

    Change LAN

    Activate wired LAN

    Activate wireless LAN

    Activate direct connect.

    Disable LAN

    Wireless LAN setup

    Cableless setup

    Standard setup

    WPS (Push button method)

    Other setup

    Advanced setup/WPS (PIN code method)

    Confirm LAN settings

    LAN setting list

    WLAN setting list

    Direct connection setting list

    Print LAN details

    Other settings

    Set printer name

    TCP/IP settings

    IPv4

    IP address

    Auto setup*/Manual setup

    DNS server

    DNS server setup

    Auto setup/Manual setup

    Dynamic update setting

    Active/Inactive*

    Host name

    Domain name

    Proxy server

    IPv6

    Enable/disable IPv6

    Enable*/Disable

    IPsec settings

    Active/Inactive*

    Use DHCPv6

    Use/Do not use*

    Manual address

    Use/Do not use*

    DNS server

    DNS server setup

    Auto setup/Manual setup

    Dynamic update setting

    IPv6 DNS dyn. update: manual

    Active/Inactive*

    IPv6 DNS dyn. update: stateless

    Active/Inactive*

    IPv6 DNS dyn. update: stateful

    Active/Inactive*

    IPv6 Use IPv4 host/domain name

    Active/Inactive*

    IPv6 DNS host name

    IPv6 DNS domain name

    WSD setting

    Enable/disable WSD

    Enable/Disable*

    Optimize inbound WSD

    Enable*/Disable

    Timeout setting

    20 minutes/15 minutes*/10 minutes/5 minutes/1 minute

    Bonjour settings

    Enable/disable Bonjour

    Enable*/Disable

    Service name

    IEEE802.1X settings

    Authentication

    Do not use*/TLS/TTLS/PEAP

    EAP-TTLS internal auth. method

    MSCHAPv2*/PAP

    Weak encryption restriction

    Restrict*/Do not restrict

    Weak certificate restriction

    Restrict*/Do not restrict

    Advanced setup

    User-ID/Username/Password/Authentication server name

    Last authentication result

    SNTP settings

    Client operation status

    Active/Inactive*

    NTP/SNTP server address

    Polling interval

    Spanning tree setting

    Active/Inactive*

    LPR protocol setting

    Enable*/Disable

    RAW protocol

    ON*/OFF

    LLMNR

    ON*/OFF

    Wireless LAN DRX setting

    Enable*/Disable

    Wired LAN DRX setting

    Enable*/Disable

    Direct connection settings

    Update SSID/password

    Direct connection device name

    Connection request confirmation

    Yes*/No

    Reset SSL certificates

    Reset LAN settings

    Paper-related settings

    Manage remaining roll amount

    Enable/Disable*

    Roll paper auto switching

    Identify size*/Do not identify size

    Keep media type

    Enable/Disable*

    Detect paper setting mismatch

    Pause/Display warning*/Do not detect/Hold job

    Paper retention setting

    Release/Retain*

    Energy save mode paper rewind

    Enable/Disable*

    Advanced paper settings

    Paper size recognition settings

    Cut sheet setting 1/Cut sheet setting 2/Roll paper setting 1/Roll paper setting 2

    Adjust roll unit

    Print advanced paper settings

    Reset paper settings for all paper

    Auto maintenance settings

    Auto nozzle check

    Standard*/1 page/10 pages/Disable

    Nozzle check error display

    Enable/Disable*

    System cleaning frequency

    Standard*/Short

    Print pattern after new head

    ON*/OFF

    Hard disk settings

    Output method

    Print*/Print (auto delete)/Save to job box

    Save first and print

    ON/OFF*

    Common job box setting

    Print*/Print (auto delete)

    Data deletion

    Fast/Fast secure/Secure

    Monitoring service settings

    Enable/disable monitoring service

    Enable/Disable*

    Communication test

    Yes/No

    Communication log

    Device user settings

    Energy saving settings

    Auto power off

    5 minutes/10 min./30 min./1 hour/4 hours/8 hours*/12 hours/OFF

    Sleep timer

    5 minutes*/10 min./15 min./20 min./30 min./40 min./50 min./60 min.

    Operation restrictions

    Job history

    Restrict/Do not restrict*

    Remote UI

    Restrict/Do not restrict*

    Print from USB flash drive

    Restrict/Do not restrict*

    Use USB connection

    Use*/Do not use

    Date/time setting

    Date display format

    YYYY/MM/DD / MM/DD/YYYY / DD/MM/YYYY

    Time zone (GMT)

    0/+1/+2/+3/+4/+5/+6/+7/+8/+9/+10/+11/+12/-12/-11/-10/-9/-8/-7/-6/-5/-4/-3/-2/-1

    Length unit setting

    Meters*/Feet/inches

    Buzzer setting

    Enable*/Disable

    EOP timer setting

    10 seconds/30 seconds/1 minute/2 minutes/5 minutes/10 minutes*/30 minutes/60 minutes

    Job history sending setting

    Send/Do not send*

    Language selection

    Firmware update

    Install update

    Check current version

    Update notification setting

    Yes*/No

    DNS server setup

    Auto setup*/Manual setup

    Proxy server setup

    Use/Do not use*

    Administrator password setting

    Remote UI or other tools/LCD, Remote UI, or other tools

  • Printer information

    System information

    Hard disk information

    Error history

    Hardware error

    Recoverable error

    Records of use

    Head information

    Head alignment performance log

    Values applied with auto settings