skip to main text

Making Copies on Plain Paper

Load the original on the platen glass to copy on the A4, Letter, B5, or A5 sized plain paper.

  1. Make sure that the printer is turned on.

  2. Load paper.

    Load A4, Letter, B5, or A5 sized plain paper.

    Select A4, LTR, B5, or A5 size for paper size setting on the LCD.

  3. Load the original on the platen glass.

  4. Press the Color button for color copying, or the Black button for black & white copying.

    The segment display on the LCD flashes.

    When the segment display changes from flashing to lit, the printer starts copying.

    Remove the original on the platen glass after copying is complete.

    • To make multiple copies

      Press the Color button or the Black button repeatedly according to the number of copies you want during the segment display flashes.

      Press the same button (Color button or Black button) as the one which you previously pressed.

    • To cancel copying

      Press the Stop button.

Important

  • Do not open the document cover or remove the original from the platen glass until scanning is completed.

    While the printer is scanning the original, the ON lamp keeps flashing.

  • If the paper size setting on the LCD is other than A4, LTR, B5, or A5, the printer performs the photo copying.

  • If you press the Color button or the Black button when the paper size is not selected on the LCD, an error code appears on the LCD.

Note

  • The original is copied at the same magnification on plain paper.

    The original is copied on plain paper with borders.

Print Quality

For the print quality of copying, you can select either "Standard" mode or "Draft" mode (speed priority).

"Standard" mode

The quality is given priority over print speed.

Press the Color or Black button for less than 2 seconds in step 4.

"Draft" mode

The print speed is given priority over quality.

Press and hold down the Color or Black button for 2 or more seconds in step 4.