skip to main text

Firmware update

You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Important

  • When you use this function, make sure the printer is connected to the Internet.

Note

  • Only Check current version is available when Disable is selected for Enable/disable Wi-Fi of Wi-Fi and also for Enable/disable Wired LAN of Wired LAN in LAN settings.

  • Install update

    Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update.

    Note

    • If the firmware update is not complete, check the following and take an appropriate action.

      • Check the network settings.

      • If Cannot connect to the server. is displayed on the touch screen, select OK and try again after a while.

  • Check current version

    You can check the current firmware version.

  • Update notification setting

    When Yes is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the touch screen.

  • DNS server setup

    Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the touch screen to perform settings.

  • Proxy server setup

    Performs settings for a proxy server. Follow the display on the touch screen to perform settings.