skip to main text

Printing Network Settings

Use the operation panel to print the printer's current network settings.

Important

  • The network settings printout contains important information about your network. Handle it with care.
  1. Make sure printer is turned on.

  2. Load plain paper.

    If you use sheets, prepare at least 10 sheets (A4 or Letter-sized).

  3. Flick HOME screen and tap Device settings.

    The menu screen appears.

  4. Tap Test print.

    If you specify the administrator password, enter the password.

  5. Tap Print LAN details.

  6. Tap Yes.

    The printer starts printing network settings information.

    Note

    • You can also print the printer's network settings. Tap Device settings on the HOME screen, tap LAN settings and Confirm LAN settings in this order, and then tap Print LAN details and tap Yes.

    The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)

    Item

    Description

    Setting

    LAN Setting

    Basic setting information

    -

    Basic Info

    IPv4 setting information (Wired LAN)

    -

    LAN Interface Mode

    Current interface

    Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Wireless direct)/Disabled

    Link Active

    Operation status

    Inactive/Active

    IP Address

    IPv4 IP address

    XXX.XXX.XXX.XXX

    Gateway Address

    IPv4 default gateway

    XXX.XXX.XXX.XXX

    Subnet Mask

    IPv4 subnet mask

    XXX.XXX.XXX.XXX

    IP Mode

    Acquiring method of IPv4 IP address

    Auto IP/DHCP/Manual

    Use DNS Auto Mode

    Acquiring DNS server automatically

    On/Off

    Primary DNS Server Address

    Primary DNS server address

    XXX.XXX.XXX.XXX

    Secondary DNS Server Address

    Secondary DNS server address

    XXX.XXX.XXX.XXX

    Control Filtering

    SNMP filtering setting information

    -

    Use IP Filtering

    Operation status of IP filtering

    On/Off

    IP Filtering Select

    IP filtering method

    Disabled/Enabled

    IP Filtering Permission Address

    IP filtering permission address

    -

    Start Address 1

    Start address 1

    XXX.XXX.XXX.XXX

    End Address 1

    End address 1

    XXX.XXX.XXX.XXX

    Use Single On 1

    Use single on 1

    On/Off

    Start Address 2

    Start address 2

    XXX.XXX.XXX.XXX

    End Address 2

    End address 2

    XXX.XXX.XXX.XXX

    Use Single On 2

    Use single on 2

    On/Off

    Start Address 3

    Start address 3

    XXX.XXX.XXX.XXX

    End Address 3

    End address 3

    XXX.XXX.XXX.XXX

    Use Single On 3

    Use single on 3

    On/Off

    Start Address 4

    Start address 4

    XXX.XXX.XXX.XXX

    End Address 4

    End address 4

    XXX.XXX.XXX.XXX

    Use Single On 4

    Use single on 4

    On/Off

    Start Address 5

    Start address 5

    XXX.XXX.XXX.XXX

    End Address 5

    End address 5

    XXX.XXX.XXX.XXX

    Use Single On 5

    Use single on 5

    On/Off

    IP Filtering Prohibit Address

    IP filtering prohibit address

    -

    Start Address 1

    Start address 1

    XXX.XXX.XXX.XXX

    End Address 1

    End address 1

    XXX.XXX.XXX.XXX

    Use Single On 1

    Use single on 1

    On/Off

    Start Address 2

    Start address 2

    XXX.XXX.XXX.XXX

    End Address 2

    End address 2

    XXX.XXX.XXX.XXX

    Use Single On 2

    Use single on 2

    On/Off

    Start Address 3

    Start address 3

    XXX.XXX.XXX.XXX

    End Address 3

    End address 3

    XXX.XXX.XXX.XXX

    Use Single On 3

    Use single on 3

    On/Off

    Start Address 4

    Start address 4

    XXX.XXX.XXX.XXX

    End Address 4

    End address 4

    XXX.XXX.XXX.XXX

    Use Single On 4

    Use single on 4

    On/Off

    LAN Setting

    Basic setting information

    -

    Basic Info

    IPv4 setting information (Wired LAN)

    -

    Control Filtering

    SNMP filtering setting information

    -

    IP Filtering Prohibit Address

    IP filtering prohibit address

    -

    Start Address 5

    Start address 5

    XXX.XXX.XXX.XXX

    End Address 5

    End address 5

    XXX.XXX.XXX.XXX

    Use Single On 5

    Use single on 5

    On/Off

    Print Filtering

    Print filtering setting information

    -

    Use IP Filtering

    Operation status of IP filtering

    On/Off

    IP Filtering Select

    IP filtering method

    Disabled/Enabled

    IP Filtering Permission Address

    IP filtering permission address

    -

    Start Address 1

    Start address 1

    XXX.XXX.XXX.XXX

    End Address 1

    End address 1

    XXX.XXX.XXX.XXX

    Use Single On 1

    Use single on 1

    On/Off

    Start Address 2

    Start address 2

    XXX.XXX.XXX.XXX

    End Address 2

    End address 2

    XXX.XXX.XXX.XXX

    Use Single On 2

    Use single on 2

    On/Off

    Start Address 3

    Start address 3

    XXX.XXX.XXX.XXX

    End Address 3

    End address 3

    XXX.XXX.XXX.XXX

    Use Single On 3

    Use single on 3

    On/Off

    Start Address 4

    Start address 4

    XXX.XXX.XXX.XXX

    End Address 4

    End address 4

    XXX.XXX.XXX.XXX

    Use Single On 4

    Use single on 4

    On/Off

    Start Address 5

    Start address 5

    XXX.XXX.XXX.XXX

    End Address 5

    End address 5

    XXX.XXX.XXX.XXX

    Use Single On 5

    Use single on 5

    On/Off

    IP Filtering Prohibit Address

    IP filtering prohibit address

    -

    Start Address 1

    Start address 1

    XXX.XXX.XXX.XXX

    End Address 1

    End address 1

    XXX.XXX.XXX.XXX

    Use Single On 1

    Use single on 1

    On/Off

    Start Address 2

    Start address 2

    XXX.XXX.XXX.XXX

    End Address 2

    End address 2

    XXX.XXX.XXX.XXX

    Use Single On 2

    Use single on 2

    On/Off

    Start Address 3

    Start address 3

    XXX.XXX.XXX.XXX

    End Address 3

    End address 3

    XXX.XXX.XXX.XXX

    Use Single On 3

    Use single on 3

    On/Off

    Start Address 4

    Start address 4

    XXX.XXX.XXX.XXX

    End Address 4

    End address 4

    XXX.XXX.XXX.XXX

    Use Single On 4

    Use single on 4

    On/Off

    Start Address 5

    Start address 5

    XXX.XXX.XXX.XXX

    End Address 5

    End address 5

    XXX.XXX.XXX.XXX

    Use Single On 5

    Use single on 5

    On/Off

    LAN Setting

    Basic setting information

    -

    IPv6 Info

    IPv6 setting information (Wired LAN)

    -

    Link Local Address

    Link local address

    -

    IP Address

    IPv6 IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length

    Link local address prefix length

    XXX (0 to 128)

    Use Manual Mode

    Operation status of IPv6 manual address

    On/Off

    Manual Address

    Manual address

    -

    IP Address

    IPv6 IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length

    Prefix length

    XXX (0 to 128)

    Use Stateful Address Mode

    Operation status of stateful address mode

    On/Off

    Stateful Address

    Stateful address

    -

    IP Address

    IPv6 IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length

    Prefix length

    XXX (0 to 128)

    Stateless Address

    Stateless address

    -

    IP Address 1

    IP address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 1

    Prefix length 1

    XXX (0 to 128)

    IP Address 2

    IP address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 2

    Prefix length 2

    XXX (0 to 128)

    IP Address 3

    IP address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 3

    Prefix length 3

    XXX (0 to 128)

    IP Address 4

    IP address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 4

    Prefix length 4

    XXX (0 to 128)

    Gateway Address

    Gateway address

    -

    IP Address 1

    IP address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 1

    Prefix length 1

    XXX (0 to 128)

    IP Address 2

    IP address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 2

    Prefix length 2

    XXX (0 to 128)

    IP Address 3

    IP address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 3

    Prefix length 3

    XXX (0 to 128)

    IP Address 4

    IP address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Prefix Length 4

    Prefix length 4

    XXX (0 to 128)

    Use DNS Auto Mode

    Acquiring DNS server automatically

    On/Off

    Primary DNS Server Address

    Primary DNS server address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Secondary DNS Server Address

    Secondary DNS server address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Control Filtering

    SNMP filtering setting information

    -

    Use IP Filtering

    Operation status of IP filtering

    On/Off

    IP Filtering Select

    IP filtering method

    Disabled/Enabled

    IPv6 Filtering Permission Info

    IPv6 filtering permission information

    -

    IP Filtering Start Address 1

    IP filtering start address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 1

    IP filtering end address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 1

    Use single on 1

    On/Off

    LAN Setting

    Basic setting information

    -

    IPv6 Info

    IPv6 setting information (Wired LAN)

    -

    Control Filtering

    SNMP filtering setting information

    -

    IP Filtering Start Address 2

    IP filtering start address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 2

    IP filtering end address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 2

    Use single on 2

    On/Off

    IP Filtering Start Address 3

    IP filtering start address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 3

    IP filtering end address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 3

    Use single on 3

    On/Off

    IP Filtering Start Address 4

    IP filtering start address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 4

    IP filtering end address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 4

    Use single on 4

    On/Off

    IP Filtering Start Address 5

    IP filtering start address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 5

    IP filtering end address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 5

    Use single on 5

    On/Off

    IPv6 Filtering Prohibit Info

    IPv6 Filtering prohibit information

    -

    IP Filtering Start Address 1

    IP filtering start address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 1

    IP filtering end address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 1

    Use single on 1

    On/Off

    IP Filtering Start Address 2

    IP filtering start address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 2

    IP filtering end address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 2

    Use single on 2

    On/Off

    IP Filtering Start Address 3

    IP filtering start address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 3

    IP filtering end address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 3

    Use single on 3

    On/Off

    IP Filtering Start Address 4

    IP filtering start address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 4

    IP filtering end address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 4

    Use single on 4

    On/Off

    IP Filtering Start Address 5

    IP filtering start address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 5

    IP filtering end address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 5

    Use single on 5

    On/Off

    Print Filtering

    Print filtering setting information

    -

    Use IP Filtering

    Operation status of IP filtering

    On/Off

    IP Filtering Select

    IP filtering method

    Disabled/Enabled

    IP Filtering Permission Info

    IP filtering permission information

    -

    IP Filtering Start Address 1

    IP filtering start address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 1

    IP filtering end address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 1

    Use single on 1

    On/Off

    IP Filtering Start Address 2

    IP filtering start address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 2

    IP filtering end address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 2

    Use single on 2

    On/Off

    LAN Setting

    Basic setting information

    -

    IPv6 Info

    IPv6 setting information (Wired LAN)

    -

    Print Filtering

    Print filtering setting information

    -

    IP Filtering Start Address 3

    IP filtering start address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 3

    IP filtering end address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 3

    Use single on 3

    On/Off

    IP Filtering Start Address 4

    IP filtering start address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 4

    IP filtering end address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 4

    Use single on 4

    On/Off

    IP Filtering Start Address 5

    IP filtering start address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 5

    IP filtering end address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 5

    Use single on 5

    On/Off

    IPv6 Filtering Prohibit Info

    IPv6 Filtering prohibit information

    -

    IP Filtering Start Address 1

    IP filtering start address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 1

    IP filtering end address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 1

    Use single on 1

    On/Off

    IP Filtering Start Address 2

    IP filtering start address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 2

    IP filtering end address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 2

    Use single on 2

    On/Off

    IP Filtering Start Address 3

    IP filtering start address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 3

    IP filtering end address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 3

    Use single on 3

    On/Off

    IP Filtering Start Address 4

    IP filtering start address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 4

    IP filtering end address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 4

    Use single on 4

    On/Off

    IP Filtering Start Address 5

    IP filtering start address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IP Filtering End Address 5

    IP filtering end address 5

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Use Single On 5

    Use single on 5

    On/Off

    MAC Info

    MAC address setting information (Wired/Wireless LAN)

    -

    MAC Address(Wired)

    MAC address (Wired LAN)

    XX:XX:XX:XX:XX:XX

    MAC Address(Wireless)

    MAC address (Wireless LAN)

    XX:XX:XX:XX:XX:XX

    Use MAC Address Filtering

    Operation status of MAC address filtering

    On/Off

    MAC Filtering Select

    MAC address filtering method

    Disabled/Enabled

    MAC Filtering Permission Info

    MAC filtering permission information

    -

    MAC Address 1

    MAC address 1

    XX:XX:XX:XX:XX:XX

    MAC Address 2

    MAC address 2

    XX:XX:XX:XX:XX:XX

    MAC Address 3

    MAC address 3

    XX:XX:XX:XX:XX:XX

    MAC Address 4

    MAC address 4

    XX:XX:XX:XX:XX:XX

    MAC Address 5

    MAC address 5

    XX:XX:XX:XX:XX:XX

    LAN Setting

    Basic setting information

    -

    MAC Info

    MAC address setting information (Wired/Wireless LAN)

    -

    MAC Filtering Prohibit Info

    MAC filtering prohibit information

    -

    MAC Address 1

    MAC address 1

    XX:XX:XX:XX:XX:XX

    MAC Address 2

    MAC address 2

    XX:XX:XX:XX:XX:XX

    MAC Address 3

    MAC address 3

    XX:XX:XX:XX:XX:XX

    MAC Address 4

    MAC address 4

    XX:XX:XX:XX:XX:XX

    MAC Address 5

    MAC address 5

    XX:XX:XX:XX:XX:XX

    Proxy Setting

    Proxy server setting information

    -

    Use Proxy

    Use proxy server

    On/Off

    Proxy Server Address

    Proxy server address

    XXXXXXXXXXXXXXXX (up to 128 characters)

    Proxy Port Number

    Proxy port specification

    1 to 65535

    Use User Authority Mode

    Use user authority mode

    On/Off

    Proxy Server User Name

    Proxy server user name

    XXXXXXXXXXXXXXXX (up to 64 characters)

    Wireless LAN Setting

    Wireless LAN setting information

    -

    Channel

    Channel (infrastructure)

    XXX (0 to 255)

    SSID

    SSID

    Wireless LAN (infrastructure) SSID (up to 32 characters)

    Security Type

    Security type for Wireless LAN (infrastructure)

    Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED

    WEP1

    WEP key 1 for Wireless LAN (infrastructure)

    XXXXXXXX (up to 32 characters)

    WEP2

    WEP key 2 for Wireless LAN (infrastructure)

    XXXXXXXX (up to 32 characters)

    WEP3

    WEP key 3 for Wireless LAN (infrastructure)

    XXXXXXXX (up to 32 characters)

    WEP4

    WEP key 4 for Wireless LAN (infrastructure)

    XXXXXXXX (up to 32 characters)

    WEP Certificate

    WEP certificate for Wireless LAN (infrastructure)

    Open/Shared/Auto

    WEP Format

    WEP format for Wireless LAN (infrastructure)

    Hex/String

    Wireless Direct Setting

    Wireless direct setting information

    -

    Channel

    Channel (Wireless direct)

    XXX (0 to 255)

    SSID

    SSID

    Wireless LAN SSID (Wireless direct)

    Security Type

    Security type for Wireless LAN (Wireless direct)

    Disabled/WPA2 PSK TKIP/WPA2 PSK AES

    Protocol Setting

    Protocol setting information

    -

    Printer Name

    Printer name

    XXXXXXXX (up to 16 characters)

    Use LPR

    Use LPR

    On/Off

    Printer Location

    Printer location

    XXXXXXXX (up to 16 characters)

    Use Wired Power Save

    Discontinuous reception (Wired LAN)

    On/Off

    Use Wireless Power Save

    Discontinuous reception (Wireless LAN)

    On/Off

    Use RAW

    Use RAW

    On/Off

    Use LLMNR

    Use LLMNR

    On/Off

    Use Spanning Tree

    Use spanning tree

    On/Off

    WSD Setting

    WSD setting information

    -

    Use WSD

    Use WSD

    On/Off

    WSD Timeout

    Timeout

    1/5/10/15/20 [min]

    Use WSD Push Scan

    Use WSD push scan

    On/Off

    Use WSD Rx Optimization

    Use WSD reception optimization

    On/Off

    SNMP Setting

    SNMP setting information

    -

    Use SNMPv1

    Use SNMPv1

    On/Off

    Use SNMPv3

    Use SNMPv3

    On/Off

    SNMP Community Name1

    SNMP community name 1

    XXXXXXXX (up to 32 characters)

    SNMP Community Name2

    SNMP community name 2

    XXXXXXXX (up to 32 characters)

    SNMP Extra Access Authority

    SNMP extra access authority

    Disable/Read Only/Read Write

    SNMP Access Authority1

    SNMPv1 community1/2 access authority

    Read Only/Read Write

    SNMP Access Authority2

    SNMPv1 community1/2 access authority

    Disable/Read Only/Read Write

    SNMPV3 Setting

    SNMPV3 setting information

    -

    User1

    User 1

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Use SNMPv3

    Use SNMPv3

    On/Off

    MIB Access Restriction

    MIB access restriction

    Read Only/Read Write

    Security Setting

    Security setting

    No Auth No Priv/Auth No Priv/Auto Priv

    Authority Algorithm

    Authority algorithm

    Null/MD5/SHA1

    Encryption Algorithm

    Encryption algorithm

    Null/AES/DES

    User2

    User 2

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Use SNMPv3

    Use SNMPv3

    On/Off

    MIB Access Restriction

    MIB access restriction

    Read Only/Read Write

    Security Setting

    Security setting

    No Auth No Priv/Auth No Priv/Auto Priv

    Authority Algorithm

    Authority algorithm

    Null/MD5/SHA1

    Encryption Algorithm

    Encryption algorithm

    Null/AES/DES

    SNMPV3 Setting

    SNMPV3 setting information

    -

    User3

    User 3

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Use SNMPv3

    Use SNMPv3

    On/Off

    MIB Access Restriction

    MIB access restriction

    Read Only/Read Write

    Security Setting

    Security setting

    No Auth No Priv/Auth No Priv/Auto Priv

    Authority Algorithm

    Authority algorithm

    Null/MD5/SHA1

    Encryption Algorithm

    Encryption algorithm

    Null/AES/DES

    User4

    User 4

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Use SNMPv3

    Use SNMPv3

    On/Off

    MIB Access Restriction

    MIB access restriction

    Read Only/Read Write

    Security Setting

    Security setting

    No Auth No Priv/Auth No Priv/Auto Priv

    Authority Algorithm

    Authority algorithm

    Null/MD5/SHA1

    Encryption Algorithm

    Encryption algorithm

    Null/AES/DES

    User5

    User 5

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Use SNMPv3

    Use SNMPv3

    On/Off

    MIB Access Restriction

    MIB access restriction

    Read Only/Read Write

    Security Setting

    Security setting

    No Auth No Priv/Auth No Priv/Auto Priv

    Authority Algorithm

    Authority algorithm

    Null/MD5/SHA1

    Encryption Algorithm

    Encryption algorithm

    Null/AES/DES

    Dynamic DNS Setting

    Dynamic DNS setting

    -

    IPv4

    IPv4

    -

    Use Dynamic DNS

    Operation status of Dynamic DNS

    On/Off

    Host Name

    Host name

    XXXXXXXX (up to 64 characters)

    Domain Name

    Domain name

    XXXXXXXX (up to 65 characters)

    IPv6

    IPv6

    -

    Use Manual Address

    DNS dynamic setting of manual address

    On/Off

    Use Stateless Address

    DNS dynamic setting of stateless address

    On/Off

    Use Stateful Address

    DNS dynamic setting of stateful address

    On/Off

    Use Name As IPv4

    Use same host name/domain name as that used for IPv4

    On/Off

    Host Name

    Host name

    XXXXXXXX (up to 64 characters)

    Domain Name

    Domain name

    XXXXXXXX (up to 65 characters)

    SNTP Setting

    SNTP setting information

    -

    Use SNTP

    Use SNTP

    On/Off

    SNTP Polling Interval

    SNTP polling interval

    1 to 48 [sec]

    SNTP Server Name

    SNTP server name

    XXXXXXXX (up to 256 characters)

    FTP Setting

    FTP setting information

    -

    Use FTP

    Use FTP

    On/Off

    Use FTP Authority

    Use FTP authority

    On/Off

    FTP User Name

    FTP user name

    XXXXXXXX (up to 33 characters)

    Bonjour Setting

    Bonjour setting information

    -

    Use Bonjour

    Use Bonjour

    On/Off

    Bonjour Service Name

    Bonjour service name

    Bonjour service name (Up to 50 alphanumeric characters)

    802.1X Setting

    802.1X setting information

    -

    Authority Type

    Enable/disable 802.1X and authority type

    Do not use/EAP-TLS/EAP-TTLS/PEAP

    EAP TTLS Type

    Internal authority type for EAP-TTLS

    MSCHAPv2/PAP

    Weak Encryption Restriction

    Weak encryption restriction

    Do not restrict/Restrict

    Weak Certificate Restriction

    Weak certificate restriction

    Do not restrict/Restrict

    Login Name

    Login name

    XXXXXXXX (up to 24 characters)

    User Name

    User name

    XXXXXXXX (up to 24 characters)

    Server Name

    Server name

    XXXXXXXX (up to 43 characters)

    IPsec Setting

    IPsec setting information

    -

    Use IPsec

    Use IPsec

    On/Off

    Previous Shared Key

    Previous shared key for IPsec

    XXXXXXXX (up to 17 characters)

    Phase2 Protocol

    IPsec phase2 protocol

    AH/ESP/AH+ESP

    IPP Setting

    IPP confirmation setting

    -

    Use IPP

    Use IPP

    On/Off

    Use IPP Authority

    Use IPP authority

    On/Off

    IPP User Setting

    IPP confirmation user setting

    -

    User1

    User 1

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User2

    User 2

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User3

    User 3

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User4

    User 4

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User5

    User 5

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User6

    User 6

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User7

    User 7

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User8

    User 8

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User9

    User 9

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    User10

    User 10

    -

    User Name

    User name

    XXXXXXXX (up to 32 characters)

    Email Setting

    E-mail setting information

    -

    Retry Count

    E-mail retry count

    0 to 5

    Retry Interval

    E-mail retry interval

    1 to 60 (min)

    Use Email Notification

    Use E-mail notification

    On/Off

    Use SSL

    Use SSL

    On/Off

    Use SSL Cert No Check

    Use SSL certification

    On/Off

    Use Mailbox Delete

    Use mailbox delete

    On/Off

    Email Setting

    E-mail setting information

    -

    SMTP Server Address

    SMTP server address

    XXXXXXXX (up to 256 characters)

    SMTP Server Port No

    SMTP server port number

    1 to 65535

    SMTP State

    SMTP state

    Invalid/Authorized/POP before SMTP

    From Address 1

    From address 1

    XXXXXXXX (up to 128 characters)

    To Address 1

    To address 1

    XXXXXXXX (up to 128 characters)

    Reply Address 1

    Reply address 1

    XXXXXXXX (up to 128 characters)

    Notice Conditions 1

    Notice conditions 1

    -

    Job End

    Job end

    On/Off

    Error Occurred

    Error occurred

    On/Off

    Warning Occurred

    Warning occurred

    On/Off

    Signature 1

    Signature 1

    XXXXXXXX (up to 128 characters)

    To Address 2

    To address 2

    XXXXXXXX (up to 128 characters)

    Reply Address 2

    Reply address 2

    XXXXXXXX (up to 128 characters)

    Notice Conditions 2

    Notice conditions 2

    -

    Job End

    Job end

    On/Off

    Error Occurred

    Error occurred

    On/Off

    Warning Occurred

    Warning occurred

    On/Off

    Signature 2

    Signature 2

    XXXXXXXX (up to 128 characters)

    RUI Setting

    RUI setting information

    -

    Use RUI

    Use Remote UI

    On/Off

    ("XX" represents alphanumeric characters.)