Firmware update

Important

• This setting item is for the administrator.

You can update the firmware of the machine, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Note

• Only Check current version is available when Disable LAN is selected for Change LAN in LAN settings.

• Install update

  Performs the firmware update of the machine. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update.

  Important

  • When you use this function, make sure that the machine is connected to the Internet.

  • If the firmware update is carried out, all faxes stored in the machine's memory are deleted.

  • You cannot start the firmware update under the following conditions:

    • While the machine is sending or receiving a fax

    • While the machine is storing the unprinted fax in machine's memory (memory reception)

    • When the unsent faxes are stored in the machine's memory

  Note

  • If the firmware update is not complete, check the following and take an appropriate action.

    • When using wired LAN, make sure that the machine is connected to the computer with a LAN cable properly.

    • Check the network settings such as an access point or a router.

    • If Cannot connect to the server. is displayed on the touch screen, tap OK, then try again after a while.

• Check current version

  You can check the current firmware version.

• Update notification setting

  When Yes is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the touch screen.

• DNS server setup

  Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the touch screen to perform settings.

• Proxy server setup

  Performs settings for a proxy server. Follow the display on the touch screen to perform settings.