S509

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.


You need to prepare: a sheet of A4 or Letter-sized plain paper*

* Be sure to use a new piece of paper.

  1. Make sure that the power is turned on and remove any paper from the rear tray.

  1. Prepare paper.

(1) Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper.

(2) Load only this sheet of paper in the rear tray with the open side facing you.

Load the paper (A) after unfolding it.

(3) Pull out the paper output tray and the output tray extension.

  1. Clean the inside of the machine.

Hold down the Stop button until the Alarm lamp flashes orange eight times, then release it immediately.

The paper cleans the inside of the machine as it feeds through the machine.

Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again.


If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Clean them according to instructions.

Cleaning the Protrusions inside the Machine

 Note

 When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.

Page top