S501

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.


You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or Letter-sized plain paper in the front tray.

  1. Open the paper output tray gently.

  1. Clean the print head.

(1) Select Setup on the HOME screen.

LCD and Operation Panel

The setup menu screen will appear.

(2) Select Maintenance, then press the OK button.

The Maintenance screen will appear.

(3) Select Cleaning, then press the OK button.

Figure: LCD

The confirmation screen will appear.

(4) Select Yes, then press the OK button.

The machine starts cleaning the print head.

Do not perform any other operations until the machine completes the cleaning of the print head. This takes about 1 minute.

The pattern print confirmation screen will appear.

(5) Select Yes, then press the OK button.

The nozzle check pattern will be printed.

  1. Examine the nozzle check pattern.

Examining the Nozzle Check Pattern

 Note

 Press the HOME button to exit Setup and display the HOME screen.

 If the problem is not resolved after cleaning the print head twice, clean the print head deeply.

Cleaning the Print Head Deeply

Page top