Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.
-
Select
Setup on the HOME screen. -
Select
Device settings, then press the OK button.The Device settings screen is displayed.
-
Use the
button to select the setting item, then press the OK button.
The setting screen for the selected item is displayed.
-
Use the
button to select the menu, then press the OK button.
-
Use the
button to select the setting item, then press the OK button.
You can select the setting menus below.
Note
-
You can use the machine considering the environment, such as setting 2-sided printing as default or enabling the machine to turn on/off automatically.
-
You can reduce the operating noise when printing at night.
