skip to main text

Setting Up the Card Slot as the Memory Card Drive of the Computer

The card slot of the machine can also be used as the memory card drive of the computer.

Note

Important

  • When Read/write attribute in Device user settings under Device settings is set to Writable from USB PC or Writable from LAN PC using the operation panel of the machine, you cannot print photos on a memory card using the operation panel of the machine. After using the card slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Not writable from PC. When you turned off the machine, Writable from USB PC or Writable from LAN PC will be canceled and the setting is returned to Not writable from PC when you turn on the machine next time.

  1. Make sure that the machine is turned on.

  2. Make sure that the memory card is not set.

    If the memory card is set, remove it from the card slot.

    Inserting the Memory Card

  3. Flick the HOME screen, then tap Setup.

    Using the Operation Panel

  4. Tap Device settings.

  5. Tap Device user settings.

  6. Tap Read/write attribute.

  7. Check the message that is displayed, then tap OK.

  8. Tap a read/write attribute to specify the setting.

    Writable from USB PC

    The card slot is used as the memory card drive of a computer connected to the machine via USB. Data can be written on the memory card from the computer.

    Writable from LAN PC

    The card slot is used as the memory card drive of a computer connected to the machine via a network. Data can be written on the memory card from the computer.

    Not writable from PC

    The card slot is used only for reading. Be sure to select this mode when printing photos from a memory card.

    9. Important

    • When Writable from USB PC or Writable from LAN PC is selected, the auto power off setting is inactive.

      For details on the auto power off setting:

      About ECO settings

Important

  • If you use the card slot as the memory card drive of the computer, you need to perform a "safe removal" operation on your computer before physically removing the memory card from your machine.

    Right-click the Removable Disk icon and click Eject. If Eject is not displayed on the screen, confirm that the Access lamp is not flashing and remove the memory card.

    Over a network, the removal operation is not needed.