skip to main text

Canon IJ Network Tool Screen

This section describes the items displayed on the Canon IJ Network Tool screen.

figure: Canon IJ Network Tool screen
  1. Utilities

    Modifies the settings of the printer.

    Select to change the network name (SSID) settings.

    Setup
    Sets up the printer.
    If you setup the printer from scratch, connect your computer and the printer with a USB cable.
  2. Printers:

    Printer name, type, and connection destination are displayed.

    The selected printer can be set up or be modified.

  3. Update

    Performs printer detection again. Click this button if the target printer is not displayed.

    Important

    • To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.
    • If the printer on a network is not detected, make sure that the printer is turned on and click Update. It may take several minutes to detect printers. If the printer is not yet detected, connect the printer and the computer with a USB cable and click Update.
    • If the printer is being used from another computer, a screen is displayed informing you of this condition.

    Note

    • This item has the same function as Refresh in the View menu.
  4. Configuration...

    Enabled when Utilities is selected. Click to display the Configuration screen to configure settings of the selected printer.

    Note

    • This item has the same function as Configuration... in the Settings menu.