Printing with Easy Setup

The simple setup procedure for carrying out appropriate printing on this printer is as follows:

1. Check that the printer is turned on

2. Load paper on the printer

3. Select the printer

   Select your model from the Printer list in the Print Dialog.

   

   Note

   • Click Show Details to switch the Setup window to the detailed display.

4. Select the paper size

   For Paper Size, select the paper size to be used.
   If necessary, set the number of copies, the pages to be printed, and the orientation.

   

5. Select Quality & Media from the pop-up menu

   

6. Select the media type

   For Media Type, select the same paper type loaded in the printer.

   

7. Select the paper source

   Select Manual Feed or Rear Tray that matches your purpose for Paper Source.

   

   Important

   • The paper source settings that can be selected may differ depending on the paper type and size.

8. Select the print quality

   For Print Quality, select High, Standard, or Fast according to your purpose.

   

   Important

   • Certain print quality levels cannot be selected depending on the settings of Media Type.

9. Complete the setup

   Click Print.
   When you execute print, the document will be printed in accordance with the type and size of the media.

   

Important

• If you check the Do not show again check box when a guide message is displayed before printing starts, this will stop any more guide messages from being displayed.
• In the Presets section, click Save Current Settings as Preset... to register the specified settings.
• To print on Canvas, Fine Art "Museum Etching", or Photo Paper Pro Premium Matte, follow the instructions displayed on the screen.