skip to main text

Printing Document in Center of Paper

When you want to position the source document in the middle of the cut paper and print, or print with even margins on the right and left in relation to the width of the roll paper, use the Print Centered function.
The print results when setting with Print Centered are as follows. Normally, if Print Centered is set when printed as in (A), it will be printed as in (B) for cut paper and (C) for roll paper.

Note

  • When setting the magnification using Scale in the Page Setup Dialog, a fixed point at the upper left corner of a page is always used as a start point for enlarging or reducing the page. For that reason, when performing reduced printing, the bottom and right margins of the paper will increase. At this time, if you place a checkmark next to Print Centered, the top, bottom, left and right margins can all be printed evenly.

The procedure for printing to the center of the paper is as follows:

  1. Select Page Processing from the pop-up menu of Print Dialog

  2. Select the paper size

    From Paper Size, select the size of the paper you want to print.

  3. Select Quality & Media from the pop-up menu

  4. Select the media type

    For Media Type, select the same paper type loaded in the printer.

  5. Select the paper source

    For Paper Source, select the setting that matches your purpose.

    Important

    • The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or roll unit option settings.
  6. Select Page Processing from the pop-up menu

  7. Selecting Roll Paper Width

    If you selected a roll paper for Paper Source, set Roll Paper Width to the width of the roll paper loaded in the printer.

  8. Print document in the center of paper

    Check the Print Centered check box.

  9. Complete the setup

    Click Print.
    When you print, the printer automatically lays out the document to the center of the page and then prints it.

Important

  • When configuring to print the whole sheet borderless, the Print Centered in the pop-up menu Page Processing of the Print Dialog is grayed out and cannot be selected.