skip to main text

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a rear tray and a cassette.
You can facilitate printing by selecting a paper source setting that matches your print conditions or purpose.

The procedure for setting paper source is as follows:

You can also set the paper source on the Quick Setup tab.

  1. Open the printer driver setup window

  2. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.

    Note

    • When Other Fine Art Paper is selected for Media Type on the Main tab, click the Page Setup tab and select "XXX (Art Paper Margin 35)" from the Page Size list.
  3. Select the paper source

    From the Paper Source list on the Main tab, select the paper source that matches your purpose.

    figure:Paper Source on the Main tab
    Automatically Select
    Based on the paper settings in the printer driver and the paper information registered on the printer, the printer automatically determines the paper source and feeds paper.
    Rear Tray
    Paper is always fed from the rear tray.
    Cassette
    Paper is always fed from the cassette.

    Important

    • Plain paper that is not Letter 8.5"x11" 22x28cm, A5, A4, or B5 and paper types other than plain paper cannot be fed from the cassette.
  4. Click OK

    When you perform print, the printer uses the specified paper source to print the data.

    Note