skip to main text

Printing Using Detailed Setting Mode

You can print by using your own settings instead of the pre-registered Print Target settings.

The procedure for using the detailed setting mode and printing is as follows:

  1. Open the printer driver setup window

  2. Select the media type

    Select the type of paper loaded in the printer from the Media Type list on the Main tab.
    If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.

  3. Select advanced settings

    From the Main tab pull-down menu, select Advanced Settings.

  4. Set print conditions

    Set the following items as necessary.

    Print Priority
    Select elements to prioritize for print results.
    Print Quality
    Selects your desired printing quality.
    Select one of the following to set the print quality level that is appropriate for the purpose.
    Color Mode
    Selects color adjustment method.
    Thicken Fine Lines
    Prints thin lines thicker for easy viewing.
  5. Select the paper size

    From the Page Size list on the Page Setup tab, select the same size as that of the document that was created with the application software.
    The current settings are displayed in the settings preview on the left side of the window.

  6. Select the paper source

    For Paper Source, select the setting that matches your purpose.

    Important

    • The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or roll unit option settings.
  7. Set the other items

    Set the other items as necessary.

  8. Complete the setup

    Click OK.
    When you print, the document is printed with the print conditions you set.