Connection Using WPS (PIN code)

  1. Hold down the Stop button (A) on the printer until the (orange) Alarm lamp (B) flashes 15 times, then release the Stop button after the fifteenth flash.

    The wireless connection setting information including the PIN code will be printed.

    figure: Press and hold the Stop button and the Alarm lamp flashes 15 times

  2. Enter the WPS PIN CODE described on the printed Network Configuration Page into the setup screen on the device (such as a smartphone). Follow the on-screen instructions on the device to proceed with setup.

  3. Hold down the Stop button on the printer until the (orange) Alarm lamp flashes 16 times, then release the Stop button after the sixteenth flash.

    figure: Press and hold the Stop button and the Alarm lamp flashes 16 times

  4. Make sure that the (blue) Wi-Fi lamp (C) on the printer is lit.

    figure: The Wi-Fi lamp lights up

    If the (orange) Alarm lamp lights up, refer to "Troubleshooting."

The network connection setup is now complete.