skip to main text

Printing Network Settings

Use the operation panel to print the printer's current network settings.

Important

  • The network settings printout contains important information about your network. Handle it with care.
  1. Make sure printer is turned on.

  2. Load two sheets of A4 or Letter-sized plain paper.

  3. Select Setup on HOME screen.

    The menu screen appears.

  4. Select Device settings and press OK button.

  5. Select LAN settings and press OK button.

    If you specify the administrator password, enter the password.

  6. Select Confirm LAN settings and press OK button.

  7. Check message, select Yes, and then press OK button.

  8. Press right Function button.

  9. Select Yes and press OK button to start printing.

    The printer starts printing network settings information.

    The printed network settings information is as follows:

    Item

    Description

    Setting

    Product Information

    Product information

    Product Name

    Product name

    XXXXXXXX

    ROM Version

    ROM version

    XXXXXXXX

    Serial Number

    Serial number

    XXXXXXXX

    Wireless LAN

    Wireless LAN

    Enable/Disable

    MAC Address

    MAC address

    XX:XX:XX:XX:XX:XX

    Infrastructure

    Infrastructure

    Enable/Disable

    Connection

    Connection status

    Active/Inactive

    SSID

    SSID

    Wireless LAN SSID

    Channel *1

    Channel

    XX (1 to 11)

    Encryption

    Encryption method

    None/WEP/TKIP/AES

    WEP Key Length

    WEP key length (bits)

    Inactive/128/64

    Authentication

    Authentication method

    None/auto/open/shared/WPA-PSK/WPA2-PSK

    Signal Strength

    Signal strength

    0 to 100 [%]

    TCP/IPv4

    TCP/IPv4

    Enable

    IP Address

    IP address

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet mask

    XXX.XXX.XXX.XXX

    Default Gateway

    Default gateway

    XXX.XXX.XXX.XXX

    TCP/IPv6

    TCP/IPv6

    Enable/Disable

    Link Local Address

    Link local address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Link Local Prefix Length

    Link local prefix length

    XXX

    Manual Setting

    Manual setting

    Enable/Disable

    IP Address *2

    IP address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Subnet Prefix Length *2

    Subnet prefix length

    XXX

    Stateless Address1 *2

    Stateless address 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Stateless Prefix Length1 *2

    Stateless prefix length 1

    XXX

    Stateless Address2 *2

    Stateless address 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Stateless Prefix Length2 *2

    Stateless prefix length 2

    XXX

    Stateless Address3 *2

    Stateless address 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Stateless Prefix Length3 *2

    Stateless prefix length 3

    XXX

    Stateless Address4 *2

    Stateless address 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Stateless Prefix Length4 *2

    Stateless prefix length 4

    XXX

    Default Gateway1 *2

    Default gateway 1

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Default Gateway2 *2

    Default gateway 2

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Default Gateway3 *2

    Default gateway 3

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Default Gateway4 *2

    Default gateway 4

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IPsec *3

    IPsec setting

    Active

    Security Protocol *3

    Security method

    ESP/ESP & AH/AH

    Direct Connection

    Direct connection

    Enable/Disable

    Connection

    Connection status

    Active/Inactive

    SSID

    SSID

    Direct Connection SSID

    Password

    Password

    Direct Connection password (10 alphanumeric characters)

    Channel

    Channel

    3

    Encryption

    Encryption method

    AES

    Authentication

    Authentication method

    WPA2-PSK

    TCP/IPv4

    TCP/IPv4

    Enable

    IP Address

    IP address

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet mask

    XXX.XXX.XXX.XXX

    Default Gateway

    Default gateway

    XXX.XXX.XXX.XXX

    TCP/IPv6

    TCP/IPv6

    Enable/Disable

    Link Local Address

    Link local address

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Subnet Prefix Length *2

    Subnet prefix length

    XXX

    IPsec *3

    IPsec setting

    Active

    Security Protocol *3

    Security method

    Other Settings

    Other settings

    Printer Name

    Printer name

    Printer name (Up to 15 alphanumeric characters)

    Direct Conn. DevName

    Device name for direct connection (Up to 32 characters)

    Device name for direct connection

    WSD Printing

    WSD printing setting

    Enable/Disable

    WSD Timeout

    Timeout

    1/5/10/15/20 [min]

    LPD Printing

    LPD printing setting

    Enable/Disable

    RAW Printing

    RAW printing setting

    Enable/Disable

    Bonjour

    Bonjour setting

    Enable/Disable

    Bonjour Service Name

    Bonjour service name

    Bonjour service name (Up to 52 alphanumeric characters)

    LLMNR

    LLMNR setting

    Enable/Disable

    SNMP

    SNMP setting

    Enable/Disable

    DNS Server

    Obtain DNS server address automatically

    Auto/Manual

    Primary Server

    Primary server address

    XXX.XXX.XXX.XXX

    Secondary Server

    Secondary server address

    XXX.XXX.XXX.XXX

    Proxy Server

    Proxy server setting

    Enable/Disable

    Proxy Address

    Proxy address

    XXXXXXXXXXXXXXXXXXXX

    Proxy Port

    Proxy port specification

    1 to 65535

    Cert. Fingerprt(SHA-1)

    Certificate fingerprint(SHA-1)

    XXXXXXXX XXXXXXXX XXXXXXXX
    XXXXXXXX XXXXXXXX

    Cert. Fingerprt(SHA-256)

    Certificate fingerprint(SHA-256)

    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

    ("XX" represents alphanumeric characters.)

    *1 Channel may range from 1 to 11 depending on country or region of purchase.

    *2 Network status is only printed when IPv6 is enabled.

    *3 Network status is only printed when IPv6 and IPsec settings are enabled.