Date/time setting
Sets the current date and time.
Date display format
Sets the format of dates displayed on the LCD and printed on sent faxes and photos.
NoteWhen ON is selected for Print date on the print settings screen in printing from a USB flash drive, the shooting date is printed in the date display format you selected.
Summer time setting
Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.
Start date/time
Sets the date and time that summer time starts.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to start summer time will be displayed after specifying the items above and pressing the OK button.
After specifying the shift time and pressing the OK button, you can specify the end date/time.
End date/time
Sets the date and time that summer time ends.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to end summer time will be displayed after specifying the items above and pressing the OK button.
Specify the shift time, then press the OK button.
Sound control
Selects the volume.
Keypad volume
Selects the beep volume when pressing the buttons on the operation panel.
Alarm volume
Selects the alarm volume.
Line monitor volume
Selects the line monitor volume.
Offhook alarm
Selects the alarm volume when the phone receiver is not put on the hook properly.
Country or region
Selects the country or region where you are using the machine.
NoteThis setting may not be available depending on the country or region of purchase.
Key repeat
Enables/Disables continuous input by pressing and holding down the 
, 
, 
, 
, +, or - button when setting the number of copies, changing the photo displayed on the LCD, setting the zoom ratio, etc.
Two-sided paper output setting
Selects the paper output setting for double-sided documents.
Output by page
Documents are ejected from the ADF in the original page order.
Fast - by back/front
Documents are ejected from the ADF with the front and back pages of each sheet in the reverse order, to make the processing time shorter.
Page top |
