FA011M

Setting the Sender Information

You can set the sender information such as date/time, unit name, and unit fax/telephone number.

About the Sender Information

Setting the Date and Time

Setting Daylight Saving Time (Summer Time)

Registering User Information

About the Sender Information

If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.

  1. Date and time of transmission

  2. Unit fax/telephone number

  3. Unit name

  4. The registered recipient's name is printed when sending faxes with the coded speed dial.

  5. Page number

Note
  • You can print USER'S DATA LIST to confirm the sender information you have registered.

    Summary of Reports and Lists

  • When sending faxes in black & white, you can select whether to print the sender information inside or outside the image area.

    Specify the setting on TTI position in Advanced FAX settings under FAX settings.

    Advanced FAX settings

  • You can select the date print format from three formats: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.

    Select the date print format on Date display format under Device user settings.

    Device user settings

Setting the Date and Time

This section describes the procedure to set the date and time.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the MENU button.

    The menu screen is displayed.

  3. Select Setup, then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Use the UPDOWN button to select Device user settings, then press the OK button.

  6. Use the UPDOWN button to select Date/time setting, then press the OK button.

  7. Set the date and time.

    Use the LEFTRIGHT button to move the cursor under the desired position, then use the UPDOWN button to enter the date and time.

    figure: LCD

    Enter the date and time in 24-hour format.

    Enter only the last two digits of the year.

  8. Press the OK button.

  9. Press the FAX button to return to the Fax standby screen.

Setting Daylight Saving Time (Summer Time)

Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.

You can set your machine to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends.

Important
  • Not all the latest information of all countries or regions is applied for Summer time setting by default. You need to change the default setting according to the latest information of your country or region.

Note
  • This setting may not be available depending on the country or region of purchase.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the MENU button.

    The menu screen is displayed.

  3. Select Setup, then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Use the UPDOWN button to select Device user settings, then press the OK button.

  6. Use the UPDOWN button to select Summer time setting, then press the OK button.

  7. Use the UPDOWN button to select ON, then press the OK button.

    To disable summer time, select OFF.

  8. Set the date and time when summer time starts.

    1. Set the date when summer time starts.

      Use the UPDOWN button to change the setting item, use the LEFTRIGHT button to change the setting, then use the OK button to confirm the selection.

      figure: LCD
    2. Set the time (in 24-hour format) when summer time starts.

      Use the LEFTRIGHT button to move the cursor under the desired position, use the UPDOWN button to enter the time, then press the OK button.

      Precede single digits with a zero.

      figure: LCD
  9. Set the date and time when summer time ends.

    1. Set the date when summer time ends.

      Use the UPDOWN button to change the setting item, use the LEFTRIGHT button to change the setting, then use the OK button to confirm the selection.

      figure: LCD
    2. Set the time (in 24-hour format) when summer time ends.

      Use the LEFTRIGHT button to move the cursor under the desired position, use the UPDOWN button to enter the time, then press the OK button.

      Precede single digits with a zero.

      figure: LCD
  10. Press the FAX button to return to the Fax standby screen.

Registering User Information

This section describes the procedure to register the user information.

Note
  • Before sending a fax, be sure to enter your name and fax/telephone number in Unit name and Unit TEL on the User information settings screen (for US only).

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the MENU button.

    The menu screen is displayed.

  3. Select Setup, then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Use the UPDOWN button to select FAX settings, then press the OK button.

  6. Use the UPDOWN button to select FAX user settings, then press the OK button.

  7. Use the UPDOWN button to select User information settings, then press the OK button.

    The screen to register the unit name and the unit fax/telephone number is displayed.

    figure: LCD
  8. Enter the unit name.

    1. Use the UPDOWN button to move the cursor to Unit name.

    2. Press the OK button.

      The screen to enter the character is displayed.

    3. Enter the unit name.

      figure: LCD
    4. Press the left Function button.

    Note
  9. Enter the unit fax/telephone number.

    1. Use the UPDOWN button to move the cursor to Unit TEL.

    2. Press the OK button.

      The screen to enter the number is displayed.

    3. Enter the unit fax/telephone number.

      figure: LCD
    4. Press the left Function button.

    Note
  10. Press the left Function button to finalize registration.

  11. Press the FAX button to return to the Fax standby screen.

Page top