Settings for Web Service

Registering the Account on Photo Sharing Site

Register the account on the photo sharing site to the machine following the procedure below.

Important

• LAN connection with the machine and internet connection are required to use this function.

• Before you register the account to the machine, you have to get the account on the photo sharing site. For getting the account, refer to the photo sharing site.

• You can register the login name or e-mail address up to 256 characters and register the password up to 80 characters. When you get the account on the photo sharing site, set the login name or e-mail address within 256 characters and set the password within 80 characters.

  Set the login name, e-mail address, and password in letters and figures can be entered on the LCD of the machine.

1. Make sure that the machine is turned on.

2. Select Setup on the HOME screen.

   LCD and Operation Panel

3. Select Web service setup, then press the OK button.

4. Use the button to select Online Album connection setup, then press the OK button.

5. Use the button to select Register account, then press the OK button.

   Note

   • When you delete the account, select Delete account, then press the OK button. After selecting the photo sharing site to delete the account and pressing the OK button, the confirmation screen to delete the account is displayed. To delete the account, select Yes and press the OK button.

6. Use the button to select the photo sharing site to register the account, then press the OK button.

   The message for account information is displayed.

7. Check the message, then press the OK button.

8. When the confirmation screen for account management is displayed, press the left Function button.

   Note

   • By pressing the OK button, you can display the message for account management policy.

9. Check that User-ID or Email is displayed, then press the OK button.

   The screen to enter the login name or e-mail address is displayed.

   Note

   • If you already have registered the account, the login name or e-mail address is displayed on the screen.

10. Enter the login name or e-mail address.

    Use the following buttons to enter the login name or e-mail address.

    , , , and buttons:

    Select a letter, number, or symbol.

    OK button:

    Enter the selected character.

    Left Function button:

    Press when entering the characters is complete.

    Center Function button:

    Switch the input mode; Lowercase mode (e.g., abc), Uppercase mode (e.g., ABC), then Numeric mode (number).

    Right Function button:

    Delete the entered character.

    

    Note

    • To edit entered characters, select the entry column (A) with the button. Use the button to move the cursor under the position where you want to edit.

11. Check the entered login name or entered e-mail address, then press the left Function button.

12. Check that Password is displayed, then press the OK button.

    The screen to enter the password is displayed.

13. Enter the password.

    Enter the password as well as the login name or e-mail address.

    Note

    • Depending on the setting on the photo sharing site, entering the password may not be necessary.

14. Press the left Function button.

    The machine accesses on the photo sharing site, then your account is confirmed.

    After the confirmation of account is complete, the confirmation screen to save the login name or e-mail address and password is displayed.

15. Use the button to select the setting, then press the OK button.

    The account registration is complete.

Resetting the Web Service Settings

This function resets all web service settings.

Reset the web service settings following the procedure below.

1. Make sure that the machine is turned on.

2. Select Setup on the HOME screen.

   LCD and Operation Panel

3. Select Device settings, then press the OK button.

4. Use the button to select Reset setting, then press the OK button.

5. Use the button to select Web service setup only, then press the OK button.

   The confirmation screen is displayed.

   Note

   • When you select Reset all, all settings you made including the web service settings are reverted to the machine back to default.

6. Use the button to select Yes, then press the OK button.

   The web service setting is reset.