FA030W

Advanced Settings of Receive Mode

You can specify the advanced settings of each receive mode.

This section describes the procedure to specify the advanced settings of the receive mode and the setting items.

Specify the advanced settings following the procedure below.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the FAX button.

    The Fax standby screen is displayed.

  3. Press the Menu button.

    The FAX menu screen is displayed.

  4. Use the LEFTRIGHT button to select Receive mode set., then press the OK button.

  5. Use the LEFTRIGHT button to select a receive mode, then press the OK button.

    The confirmation screen asking whether to make advanced settings is displayed.

  6. Use the LEFTRIGHT button to select Yes, then press the OK button.

  7. Use the LEFTRIGHT button to select a setting item, then press the OK button.

  8. Use the LEFTRIGHT button to specify the setting, then press the OK button.

    Depending on the setting items, the related setting items are displayed after you specify the setting of the advanced settings and press the OK button. Use the LEFTRIGHT button again to specify the setting, then press the OK button. The LCD returns to the Fax standby screen after you finish specifying all settings.

    Note
    • The * (asterisk) on the LCD indicates the current setting.

For details on advanced settings of each receive mode, see below.

Advanced setting in TEL priority mode

Advanced setting in Fax only mode

Advanced setting in DRPD

Advanced setting in Network switch

Note
  • Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode.

  • DRPD is available only in the US and Canada.

  • Network switch may not be available depending on the country or region of purchase.

Advanced setting in TEL priority mode

You can specify the following setting items.

  • Manual/auto switch

    If you select ON, the machine automatically receives faxes after the external device rang a specified length of time.

    You can specify the length of time until automatic reception is started.

  • User-friendly RX

    If you select ON, the machine automatically switches from telephone calling to fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering machine answers. When you have an answering machine connected to the machine, select ON to switch to fax reception automatically after the answering machine answers.

    If you select OFF, the machine does not switch from telephone calling to fax reception automatically even if the machine detects the fax signal (CNG signal). Select OFF if you want the machine not to switch automatically during a call.

Note
  • If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device rings specified with Incoming ring in Fax only mode is available in TEL priority mode.

    If you want to specify the number of times the external device rings in TEL priority mode, select Fax only mode for Receive mode set. under FAX menu, specify the number of times the external device rings with Incoming ring, then switch to TEL priority mode for Receive mode set..

  • If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto switch be set to OFF.

Advanced setting in Fax only mode

You can specify the following setting item.

  • Incoming ring

    You can specify the number of times the external device rings when incoming.

Advanced setting in DRPD

You can specify the following setting items.

  • DRPD: FAX ring pat.

    Sets the distinctive ring pattern of a call that the machine assumes is a fax call.

    If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company.

  • Incoming ring

    You can specify the number of times the external device rings when incoming.

Advanced setting in Network switch

You can specify the following setting item.

  • Incoming ring

    You can specify the number of times the external device rings when incoming.

Page top